---
title: Adding a Branch (VPN Client)
description: "## 🏬 Adding a Branch (VPN Client) 1. Go to **Devices** → **Configurations** → **VPN** on the branch router. 2. Click **Add new Local Network** and enter a name and the branch subnet (e.g. 192.168.20.0/24). Click **Add**. 3. Turn on…"
url: "https://mikrotiksdwan.com/docs/adding-vpn-client-to-sd-wan/"
updated: "2026-11-17"
category: "VPN site-to-site"
---

# Adding a Branch (VPN Client)

## 🏬 Adding a Branch (VPN Client)

1. Go to **Devices** → **Configurations** → **VPN** on the branch router.
2. Click **Add new Local Network** and enter a name and the branch subnet (e.g. 192.168.20.0/24). Click **Add**.
3. Turn on **Status VPN**.
4. Wait up to 4 minutes and check the **Connection Status**.

  ⚠️ Each site must use a **unique subnet**. Two branches with 192.168.0.0/24 will cause routing conflicts.

- Disable **FastTrack** if traffic between sites does not flow.
- WireGuard hubs require RouterOS v7 on the branch.
- If the device page shows “This device is configured as a concentrator”, it is the hub and does not need this step.

  🧩 If you encounter any issues, please contact support and include relevant screenshots to help troubleshoot the problem effectively.   [Contact Support](https://mikrotiksdwan.com/support)
