---
title: Configuring WAN Failover
description: "## ⚙️ Configuring WAN Failover 1. Go to **Devices** → **Configurations** → **SD-WAN** → **WAN**. 2. In **WAN Mode**, select **Failover**. 3. Click a WAN slot to edit it and fill in **ISP Name** (e.g. ISP1), **Gateway Interface** (e.g. ether1,…"
url: "https://mikrotiksdwan.com/docs/configure-failover/"
updated: "2026-11-16"
category: Wan FailOver
---

# Configuring WAN Failover

## ⚙️ Configuring WAN Failover

1. Go to **Devices** → **Configurations** → **SD-WAN** → **WAN**.
2. In **WAN Mode**, select **Failover**.
3. Click a WAN slot to edit it and fill in **ISP Name** (e.g. ISP1), **Gateway Interface** (e.g. ether1, pppoe-out1, lte1) and, optionally, the **Monitoring IP**. Click **Save**.
4. Repeat for the other links (minimum 2, maximum 4).
5. Drag the links to set the priority order (top = primary).
6. Click **Save**. The message “Successfully activated failover” confirms the activation.

![Configuring WAN failover](../gifs/failover-config.gif)

  ⏱️ After activation, the **WAN Status**, **WAN Latency** and **Packet Loss** panels start showing each link's health within a few minutes.

### ✅ Checklist before saving

- Every gateway interface already has internet on the MikroTik.
- Old failover scripts/netwatch/distance rules created manually were removed.
- Each link uses a different monitoring IP (the defaults already are).

  🧩 If you encounter any issues, please contact support and include relevant screenshots to help troubleshoot the problem effectively.   [Contact Support](https://mikrotiksdwan.com/support)
