---
title: How FailOver works
description: "[SD-WAN for MikroTik: Failover WAN #mikrotik #sdwan #mikrotiksdwan #failover](https://www.youtube.com/embed/DTH5OJBGeF4?feature=oembed) ### ![](https://mikrotiksdwan.com/wp-content/uploads/2024/02/Design-sem-nome-9.png) ## 🌐 WAN Failover with up to 4 Links The MikroTik SD-WAN platform supports intelligent failover across up to 4 WAN links, ensuring high availability for your network connection.…"
url: "https://mikrotiksdwan.com/docs/how-failover-works/"
updated: "2026-11-16"
category: Wan FailOver
---

# How FailOver works

[SD-WAN for MikroTik: Failover WAN  #mikrotik #sdwan #mikrotiksdwan  #failover](https://www.youtube.com/embed/DTH5OJBGeF4?feature=oembed)

###

![](https://mikrotiksdwan.com/wp-content/uploads/2024/02/Design-sem-nome-9.png)

## 🌐 WAN Failover with up to 4 Links

The MikroTik SD-WAN platform supports intelligent failover across up to 4 WAN links, ensuring high availability for your network connection. Switching happens directly on the MikroTik, so it keeps working even if the router loses contact with the platform.

Each link is continuously monitored by latency and packet loss to a monitoring IP. A script on the router (`SDWAN:-Monitoring-WAN`) evaluates the links every minute.

  🔄 Failover follows a **sequential order**: if the primary link fails, the system switches to the secondary, then tertiary, and so on. When the primary recovers, traffic returns to it.

### 📡 Monitoring IPs

Each link pings a different public IP, so a single DNS outage never brings all links down. You can change it in the **Monitoring IP (optional)** field.

| Link | Default monitoring IP |
| --- | --- |
| WAN 1 | 8.8.4.4 |
| WAN 2 | 1.0.0.1 |
| WAN 3 | 208.67.220.220 |
| WAN 4 | 9.9.9.9 |

### ⚙️ Configuration Requirements

- Between **2 and 4** WAN links.
- Each WAN link must be **pre-configured** on MikroTik with an active gateway (DHCP client, static, **PPPoE**, **LTE** and **VLAN** interfaces are supported).
- Any **manual failover scripts** or netwatch rules should be removed to avoid conflicts.
- Ensure all links have **active internet access** before activation.
- Monitoring IPs must be valid IPv4 addresses and cannot be repeated.

### 🔀 Failover or Load Balancer?

The same screen offers two **WAN modes**: *Failover* (one active link, others on standby) and *Load Balancer* (traffic split among links by percentage). See [Load Balancer](https://mikrotiksdwan.com/docs/load-balancer/).

### 🛠️ Updates & Support

Changes to failover settings may take up to 5 minutes to be fully applied. Link status, latency and loss are shown on the device page and on [WAN Health](https://mikrotiksdwan.com/docs/wan-health/).

  🧩 If you encounter any issues, please contact support and include relevant screenshots to help troubleshoot the problem effectively.   [Contact Support](https://mikrotiksdwan.com/support)
