View Categories

Adding a Branch (VPN Client)

Tabela de conteĂşdos (ĂŤndice)

🏬 Adding a Branch (VPN Client) #

  1. Go to Devices → Configurations → VPN on the branch router.
  2. Click Add new Local Network and enter a name and the branch subnet (e.g. 192.168.20.0/24). Click Add.
  3. Turn on Status VPN.
  4. Wait up to 4 minutes and check the Connection Status.
⚠️ Each site must use a unique subnet. Two branches with 192.168.0.0/24 will cause routing conflicts.
  • Disable FastTrack if traffic between sites does not flow.
  • WireGuard hubs require RouterOS v7 on the branch.
  • If the device page shows “This device is configured as a concentrator”, it is the hub and does not need this step.
đź§© If you encounter any issues, please contact support and include relevant screenshots to help troubleshoot the problem effectively.